RANE HAL3S Multiprocessor Online now

RANE HAL3S Multiprocessor

Rane HAL3S Multiprocessor

Audio Digital Multiprocessor

The Rane HAL3s is a digital processor for audio systems. This groundbreaking architecture is used for room combining, paging and distributing audio to several zones in an installation. Utilizing Halogen® software, even novice users are guided through what used to be complex tasks in just minutes. No intricate matrix mixing or presets are required for room combining and paging. No complex wiring is required to distribute pages and background music to multiple zones. Seamlessly interface HAL to small or large installations with web controls, (no app required) and/or a broad variety of peripheral devices including smart Digital Remotes (DRs), Remote Audio Devices (RADs), portable or rack automixers, small remote amplifiers, and an advanced Paging Station. In addition, the HAL3s Multiprocessor and Halogen™ software check the status, location, CAT 5e wiring integrity, and that audio is flowing in all peripheral devices, so you know your system is properly connected and ready to go.

In the box

• HAL3s
• Euroblock connectors
• Cat-5e cable
• IEC power cable

Features:

• 6-in 10-out system: 2×6 analog & 4×4 expansion (via RAD ports)
• 2 Mic/Line, Line-plus inputs with 48V phantom power
• Supports up to 2 remote audio devices (RADs) and 2 digital remotes (DRs) or 4 digital remotes (DRs)
• 4 logic inputs for contact closure control
• Front panel signal and overload indicators
• Supports control via web browser
• Event manager for time-of-day event control
• 108dB dynamic range

Specifications:

• Analog I/O: 2 Mic/Line/Line-plus Inputs, 6 Line Outputs
• Connectors: 4x 6-pin, 5mm pitch, Green = Inputs, Orange = outputs
• CODEC: 24-bit, 48 kHz

All Inputs

• Inputs Impedance: 2.9 k?
• Inter-channel isolation: >100 dB
• CMRR: 55 dB
• Inputs: Dynamic Mic Mode: Active Balanced
• Gain: +3dB to + 50 dB
• THD+N: < 0.005 %
• Equivalent Input Noise: -120 dBu
• Maximum Input: -18 dBV (125 mVrms)
• Frequency Response: 20-20k Hz, +0.0 / -0.3 dB
• Inputs: Condenser Mic Mode: Active Balanced
• Gain: +18 dB to +38 dB
• Phantom Power: +48 VDC
• THD+N: < 0.005 %
• Equivalent Input Noise: -110 dBu
• Maximum Input: -6 dBV (500 mVrms)
• Frequency Response: 20-20k Hz, +0.0 / -0.3 dB
• Inputs: Line + Mode: Active Summer
• Gain: 0 dB to +20 dB
• THD + N: < 0.007 %
• Maximum Input: 14+ dBu
• Frequency Response: 20-20k Hz, +0. / -0.3 dB
• Dynamic Range (in to out): 108 dB
• Inputs: Line Mode: Active Balanced
• Gain: 0 dB
• THD + N: < 0.005 %
• Maximum Input: +14 dBu
• Frequency Response: 20-20k Hz, +0.0 / -0.3 dB
• Dynamic Range (in to out): 108 dB
• Output: Active Balanced
• Impedance: 200?
• Maximum Output: +20.0 / +15.5dBu

Indicators

• Signals: -50 dBFS
• Overload: -0.5 dBFS

Propagations Delays

• RAD In out RAD Out: 1.71 ms
• RAD In to Analog Out: 1.85 ms
• Analog In to RAD Out: 2.25
• Analog In to Analog Out: 2.39 ms

DSP

• Processing Power: 2400 MIPS
• WOrd Length: 32 / 64-bit Floating Point
• Delay Memory: 20 seconds

Computer Interface

• Type: Ethernet 1000 base-T
• Cable: Shielded CAT 5e or better
• Length: 100 meters / 300 feet

RAD port

• Audio Channels: 2 in x 2 out
• Power: 24 VDC @ 100 mA
• Length: 152 meters / 500 feet

DR Ports

• Power: 24 VDC @ 50 mA
• Length: 300 meters / 1000 feet

Logic Inputs

• Connector: Mini Euroblock
• Internal Pull-up: 51.1 k?, 5.0 V
• Vin High: >2.2 V
• Vin Low: <0.7 V
• Wiring: Class 2
• Power Requirements: 100 to 240 VAC
• Ambient Room Temp.: 40°C
• Unit: Conformity: CE, FCC, cCSAus
• Unit: Size: 1.73″H x 19 “W x 8.25 “D
• Weight; 4.75 lb.
• Shipping: Size: 4.25″ x 20.3″ X 13.75″
• Weight: 9 lb.