RME TEB 8-channel TDIF Interface with Wordclock
RME TEB 8-channel TDIF Interface with Wordclock
The TEB (TDIF Expansion Board) adds an 8-channel TDIF interface to all ADAT-capable RME cards (see below). Special features include manual choice of clock reference, status LEDs and a word clock output. The TEB is designed for maximum flexibility. Used with the Hammerfall series and the HDSP 9652, it can even be used at sample rates of 88.2 kHz and 96 kHz. Meeting the TDIF specification, Double Line mode uses two channels in single speed to get one channel in double speed. Therefore at 88.2/96 kHz 4 channels are available. Installation is done in a convenient manner using the supplied bracket. No PCI slot on the motherboard is needed. The integrated Clock Select Switch sets the TDIF reference clock, thus avoids any clocking problems even with ‘problematic’ TDIF devices.
Specifications:
- TDIF port: D-sub 25 pin
- Supported sample rates: 44.1 kHz, 48 kHz, varispeed (33 – 57 kHz)
- Double Line mode: 4 channels at 88.2 kHz and 96 kHz (not with DIGI96 series)
- Word clock output: BNC, low-impedance driver stage, 4 Vss into 75 Ohms, short-circuit-proof
- Power supply uses 3.5″ floppy connector, 5 V DC, 100 mA
- AEB needs no slot on the motherboard
- Standard bracket, board dimensions AEB4: 75 x 95 mm
- 2 internal cable 2-pin, 1 internal cable 3-pin, 1 power adapter cable 5 1/4″ to 2 x 3.5″ included
