Shure A15AS Switchable Attenuator – 15 / 20 / 25 dB – Passes Phantom Power
Shure A15AS Switchable Attenuator – 15 / 20 / 25 dB – Passes Phantom Power
The Shure A15AS Switchable In-Line Attenuator reduces the level of any balanced microphone or line-level signal by 15, 20, or 25 dB. It is specially suited to reducing the level of a high-output microphone to prevent it from overloading the microphone input of a mixer or recorder in applications with high sound pressure levels. In addition, the A15AS may be used to reduce the level of a line-level mixer output to prevent overloading the aux-level input of a recorder. The A15AS is equipped with a female 3-pin XLR connector on the input side, and a male 3-pin XLR connector on the output side. Attenuation is controlled by a three-position slide switch. The A15AS allows phantom power to pass through from the mixer to the microphone, so it can be used with condenser microphones.
Features:
- Provides 15, 20, or 25 dB of microphone attenuation
- For use with all low-impedance and phantom-powered condenser microphones
- XLR input and output
- Full magnetic shield in a steel gray-enamel-finished case
Specifications:
- General:
- In-Line Accessory Type: Attenuator/Pad
- Input / Output Level:
- Input: Mic/Line Level
- Output: Mic/Line Level
- Number of Channels: 1
- Attenuation: -15 dB / -20 dB / -25 dB (Selectable)
- Controls: 1x Pad Switch
- Connectivity:
- Inputs/Outputs:
- 1x XLR 3-Pin Female Input
- 1x XLR 3-Pin Male Output
- Inputs/Outputs:
- Performance:
- Impedance:
- Input: 1 Kilohms
- Output: 150 Ohms
- Impedance:
- Physical:
- Dimensions: 4.5 x 0.7″ / 11.4 x 1.9 cm
