Shure MX396/C-DUAL Microflex Dual-Element Condenser Microphone – Back Cable Exit / Open Cable Ends
Shure MX396/C-DUAL Microflex Dual-Element Condenser Microphone – Back Cable Exit / Open Cable Ends
Microflex Multi-Element Boundary microphones deliver a unique and versatile tool for conference room installations. Clean and simple in appearance, Multi-Element Boundary mics come in two or three element configurations, combining the coverage of multiple microphones into one small, compact package.
Features:
- Low profile, aesthetic design
- Wide dynamic range and smooth frequency response
- Configurable mute switch with logic output
- RF filtering with CommShieldâ„¢ technology
- End of table (300°), center of table (360°), or cross table (bidirectional) coverage patterns
- Individual control of each element
- Bi-color status indicator
- Logic input/output for remote LED and mute control
Specifications:
- Type: Condenser (electret bias)
- Frequency Response: 50 to 17000 Hz
- Polar Pattern: MX396/C-DUAL: 2 x Cardioid
- Output Impedance: EIA Rated at 150 Ohms (170 Ohms actual)
- Output Configuration: Active balanced
- Common Mode Rejection (10 Hz to 100 kHz): 45 dB minimum
- Preamplifier Output Clipping Level (1% THD): -7 dBV (0.5 V)
- Weight:
- Net: 0.587 kg (1.29 lbs.)
- Packaged: 0.916 kg (2.02 lbs.)
- Logic Connections:
- LED IN: Active low (≤1.0V), TTL compatible. Absolute maximum voltage: -0.7V to 50V.
- LOGIC OUT: Active low (≤1.0V), sinks up to 20mA, TTL compatible.
- Absolute maximum voltage: -0.7V to 50V (up to 50V through 3 kilohms)
- Mute Switch Attenuation: -50 dB minimum
- Cable: 6.1 m (20 ft) attached unterminated cable with three shielded audio pairs and three shielded conductors for logic control
- Environmental Conditions:
- Operating Temperature: -18 to 57 deg. C (0 to 135 deg. F)
- Storage Temperature: -29 to 74 deg. C (-20 to 165 deg. F)
- Relative Humidity: 0 to 95%
- Power Requirements: MX396/C-DUAL: 48–52 Vdc phantom, 10.0 mA
- Sensitivity (at 1 kHz , open circuit voltage): -35 dBV/Pa (18 mV)
- Maximum SPL (1 kHz at 1% THD, 1 kilohms load): 122 dB
- Equivalent Output Noise (A-weighted): 28 dB SPL
- Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz): 66 dB
- Dynamic Range (1 kilohm load at 1 kHz): 94 dB
