Shure MX396/C-TRI Microflex Tri-Element Condenser Microphone – Back Cable Exit / Open Cable Ends
Shure MX396/C-TRI Microflex Tri-Element Condenser Microphone – Back Cable Exit / Open Cable Ends
Cardioid boundary microphone delivers a unique and versatile tool for conference room installations in a simple design. It features wide dynamic range, smooth frequency response, a mute switch, and CommShield technology for RF filtering.
Features:
- Low profile, aesthetic design
- Wide dynamic range and smooth frequency response
- Configurable mute switch with logic output
- RF filtering with CommShieldâ„¢ technology
- End of table (300°), center of table (360°), or cross table (bidirectional) coverage patterns
- Individual control of each element
- Bi-color status indicator
- Logic input/output for remote LED and mute control
Specifications:
- Type: Condenser (electret bias)
- Frequency Response: 50–17000 Hz
- Output Impedance: EIA Rated at 150 Ω (170 Ω actual)
- Output Configuration: Active Balanced
- Sensitivity (at 1 kHz , open circuit voltage): –35 dBV/Pa (18 mV)
- Maximum SPL (1 kHz at 1% THD, 1 kΩ load): 122 dB
- Equivalent Output Noise (A-weighted): 28 dB SPL
- Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz): 66 dB
- Dynamic Range (1 kΩ load at 1 kHz): 94 dB
- Common Mode Rejection (10 Hz to 100 kHz): 45 dB minimum
- Preamplifier Output Clipping Level (1% THD): -7 dBV (0.5 V)
- Weight:
- Net: 0.587 kg (1.29 lb)
- Packaged: 0.916 kg (2.02 lbs)
- Logic Connections:
- LED IN: Active low (≤1.0V), sinks up to 20mA, TTL compatible. Absolute maximum voltage: -0.7V to 50V (up to 50V through 3kΩ).
- LOGIC OUT: Active low (I 1.0V), sinks up to 20mA, TTL compatible. Absolute maximum voltage: -0.7V to 50V (up to 50V through 3kΩ).
- Mute Switch Attenuation: -50 dB minimum
- Cable: 6.1 m (20 ft) attached unterminated cable with three shielded audio pairs and three shielded conductors for logic control.
- Environmental Conditions:
- Operating Temperature: -18–57 °C (0–135 °F)
- Storage Temperature: -29–74 °C (-20–165 °F)
- Relative Humidity: 0–95%
- Power Requirements: 48–52 Vdc phantom, 12.0 mA
