Shure MXA901W-R-TB-V MXA901W-R and A901-R-TB Virtual Bundle – White
Shure MXA901W-R-TB-V MXA901W-R and A901-R-TB Virtual Bundle – White
Shure MXA901W-R-TB-V
The sleekest ceiling array microphone yet, the MXA901 provides superb AV conferencing audio in a discreet and stylish 13.5-inch round form factor that complements any interior design. Single-Zone Automatic Coverage™ technology captures talkers clearly with no setup. Use one MXA901 in smaller rooms or multiple units in larger spaces. Onboard IntelliMix® DSP delivers echo- and noise-free audio, while next-generation array architecture ensures natural speech and enhanced directional pickup.
Shure A901-R-TB Tile Bridge
The A901-R-TB tile bridge kit includes accessories to install an MXA901-R microphone in a standard tile grid ceiling. The tile bridge rests on the ceiling grid’s T-bars above the tile, and the ceiling mount installs in the tile bridge. When finished, the microphone sits nearly flush with the ceiling.
Features:
- Shure MXA901W-R-TB-V:
- Single-Zone Automatic Coverage technology captures audio from a 20 by 20-foot (6 by 6 meter) area out of the box
- Onboard IntelliMix DSP with acoustic echo cancellation, noise reduction, automatic mixing, automatic gain control, and EQ for echo- and noise-free audio
- Round 13.5-in. diameter (34 cm) form factor with white, black, or aluminum finish
- On-ceiling mounting bracket included; versatile options for on-ceiling, in-ceiling, pole, rod, or suspension mounting available
- Shure Designer System Configuration software for easy setup and configuration
- Embedded web application for setup flexibility
- LED status bar with configurable colors and brightness
- Dante and AES67 audio networking protocols
- Shure A901-R-TB Tile Bridge:
- Mount MXA901-R Mic in drop ceiling grid
- Near flush mount ceiling installation
- Includes tile bridge & ceiling mount
- Includes round VESA mount
- Includes support arms and screw sets
Specifications:
- Shure MXA901W-R-TB-V:
- General:
- Coverage Area Size: 20 x 20 feet (6.1 x 6.1 meters)
- Coverage Type: Single-zone automatic
- Power Requirements: Power over Ethernet (PoE), Class 0
- Power Consumption: 10.1 W maximum
- Control Software: Shure Designer or web application
- Cable Requirements: Cat 5e or higher (shielded cable recommended)
- Connector Type: RJ45
- Plenum Rating: UL2043 (Suitable for Air Handling Spaces)
- Dust Protection: IEC 60529 IP5X Dust Protected
- Operating Temperature Range: −6.7°C (20°F) to 40°C (104°F)
- Storage Temperature Range: −29°C (-20°F) to 74°C (165°F)
- Audio:
- Microphone Elements: 85 MEMS
- Frequency Response: 100 Hz to 20 kHz
- AES67 or Dante Digital Output:
- Channel Count: 2 total channels – 1 automix output, 1 AEC reference in channel
- Sampling Rate: 48 kHz
- Bit Depth: 24
- Sensitivity:
- At 1 kHz: −4.4 dBFS/Pa
- Maximum SPL:
- Relative to 0 dBFS overload: 98.4 dB SPL
- Signal-To-Noise Ratio:
- Ref. 94 dB SPL at 1 kHz: 67.1 dB A-weighted
- Latency:
- Does not include Dante latency: 33.5 ms
- Self Noise: 26.9 dB SPL-A
- Dynamic Range: 71.5 dB
- Built-in Digital Signal Processing: Automatic mixing, acoustic echo cancellation (AEC), noise reduction, automatic gain control, compressor, delay, equalizer (4-band parametric), mute, gain (140 dB range)
- Acoustic Echo Cancellation Tail Length: Up to 250 ms
- Dimensions:
- Height: 1.64 in. (41.66 mm)
- Circumference: 13.5 in. (342.9 mm)
- Smaller Top Circumference: 11.61 in. (294.89 mm)
- Weight: 5 lb. (2.3 kg)
- General:
- Shure A901-R-TB Tile Bridge:
- General:
- Compatibility: Shure Microflex Advance MXA901-R
- Environmental:
- Certifications: REACH
- Physical:
- Mounting: Multiple Ceiling Tile
- Dimensions: 15 x 2.5″ / 382 x 64.5 mm (Ceiling Mount)
- General:
