Shure P300-IMX IntelliMix Audio Conferencing Processor
Shure P300-IMX IntelliMix Audio Conferencing Processor
The IntelliMix P300 Audio Conferencing Processor offers a predefined matrix and presets to simplify the set up process reducing the lengthy commissioning time often associated with DSP. The unobtrusive form factor allows discrete installations, making it compatible for a wider variety of meeting rooms. Versatile connectivity options provide freedom of choice when joining a room video system including via soft codec, or connecting laptops and mobile devices. Featuring acoustic echo cancellation, noise reduction and automatic gain control for up to 8 Dante channels, the P300 ensures echo- and noise-free conference room audio.
Features:
- Connects 10 Dante audio inputs, 2 analog inputs, USB and a mobile device to an AV conferencing system or a PC-based videoconferencing application
- Includes Shure developed DSP algorithms to enhance audio quality in AV conferences: 8 channels of microphone processing featuring AEC, noise reduction, and automatic gain control, IntelliMix automatic mixing, matrix mixing, delay, compressor and PEQ
- Flexible signal routing and connectivity: analog audio (2 block in / 2 block out) to connect to room AV conferencing system; USB (1 in/out) to connect to laptop or room PC; one 3.5 mm TRRS jack to connect to a mobile device to enable an additional participant to join
- Power-over-Ethernet (PoE+) eliminates the need for an outboard power supply
- Compact form factor is easy to mount without equipment rack
Specifications:
- Audio:
- Frequency Response: 20 Hz to 20 kHz (+1, -1.5 dB)
- Dante Digital Audio:
- Sampling Rate: 48 kHz
- Bit Rate: 24 Bit
- USB Audio:
- Sampling Rate: 48 kHz
- Bit Rate: 24 / 16 Bit
- Latency:
- Firmware 4.1 and Newer:
- Dante 1-8 In to Dante Out (AEC enabled): 15.4 ms
- Dante 1-8 In to Dante Out (AEC disabled): 8.7 ms
- Dante 9-10 In to Dante Out: 3.4 ms
- Analog In to Analog Out: 3.8 ms
- Firmware 3.1 and Older:
- Dante 1-8 In to Dante Out (AEC Enabled): 12.5 ms
- Dante 1-8 In to Dante Out (AEC Disabled): 5.8 ms
- Dante 9-10 In to Dante Out: 1.8 ms
- Analog In to Analog Out: 2.2 ms
- Firmware 4.1 and Newer:
- Acoustic Echo Cancelling:
- Tail Length: Up to 300 ms
- Analog Connections
- Dynamic Range (20 Hz to 20 kHz, A-Weighted, Typical): Analog to Dante: 113 dB, Dante to Analog: 117 dB
- Equivalent Input Noise (20 Hz to 20 kHz, A-Weighted, Input Terminated with 150 Ohms): Line -86 dBV, Aux -98 dBV
- Total Harmonic Distortion at 1 kHz, 0 dBV Input, 0 dB Analog Gain: <0.05%
- Common Mode Rejection Ratio (150-Ohm Balanced Source @ 1 kHz): > 50 dB
- Input Impedance: 9.6 Kilohms
- Input Clipping Level: Line +27 dBV, Aux+15 dBV
- Output Impedance: 80 Ohms
- Output Clipping Level: Line +20 dBV, Aux +0 dBV, Mic -26 dBV
- Mobile:
- Connector: 1/8″ / 3.5 mm
- Pin Assignments: Tip: Audio Input (Left), Ring 1: Audio Input (Right), Ring 2: Ground, Sleeve: Audio Output (To Phone)
- Dynamic Range (20 Hz to 20 kHz, A-Weighted, Typical): Analog to Dante: 99 dB, Dante to Analog: 90 dB
- Total Harmonic Distortion (at 1 kHz, 0 dBV Input, 0 dB Analog Gain): <0.05%
- Input Impedance: 3.7 Kilohms
- Input Clipping Level: +4 dBV
- Output Impedance: 1.4 Kilohms
- Output Clipping Level (Output Terminated with 2.2 Kilohms): -20 dBV
- General:
- Analog Input:
- 2 x 3-Pin Block Connector (Active Balanced)
- 1 x 1/8″ / 3.5mm TRRS Input
- Control Software: Shure Designer
- Analog Output: 2 x 3-Pin Block Connector (Impedance Balanced)
- USB:
- USB 2.0, Type B
- Single Port Carries 2 Input and 2 Output Channels (Summed Mono)
- Network Connection:
- 1 x RJ45
- 10 x Dante Inputs
- 8 x Dante Outputs
- Networking: Cable Requirements: Cat 5e or Higher (Shielded Cable Recommended)
- Polarity: Non-Inverting, Any Input to Any Output
- Power Requirements: 802.3 at Type 2 (PoE Plus), Class 4
- Power Consumption: 17.5 W, Maximum
- Thermal Dissipation:
- Maximum: 17.5 W (60 BTU/Hr)
- Typical: 14.6 W (50 BTU/Hr)
- Operating Temperature Range: 20 to 122° F / -6.7 to 50° C
- Storage Temperature Range: -20 to 165° F / -29 to 74° C
- Dimensions: 1.6 x 8.3 x 8.9″ / 4 x 21 x 22.6 cm
- Weight: 3.8 lb / 1.71 kg
- Analog Input:
