Shure QLXD14 Combo System with QLXD1 Bodypack and QLXD4 Receiver – J50A Band
Shure QLXD14 Combo System with QLXD1 Bodypack and QLXD4 Receiver – J50A Band
Shure QLX-D™ Digital Wireless is the clear choice for exceptionally detailed wireless audio in widely diverse and demanding environments. A highly flexible system featuring streamlined setup and operation, QLX-D boasts impressive RF efficiency to get more channels on air using less spectrum, while the rugged all-metal construction withstands the rigors of constant use. From corporate seminars to music clubs, classroom lectures to houses of worship, Shure QLX-D Digital Wireless has it covered – delivering confident performance, no matter what the venue.
Features:
- Transmitter:
- Rugged metal construction
- Backlit LCD with easy to navigate menu and controls
- 2 x AA batteries provide up to 9 hours of runtime
- Optional Shure SB900A lithium-ion rechargeable battery provides up to 10 hours of runtime
- Displays remaining battery life in hours and minutes when Shure SB900A is used
- Switchable RF power (1,10mW)
- External charging contacts for docked charging
- Receiver:
- Transparent, 24-bit digital audio
- 20 Hz – 20 kHz frequency range
- 120 dB dynamic range
- No transmitter gain adjustment needed
- Up to 72 MHz overall tuning bandwidth
- 22 compatible channels per 8 MHz TV channel
- Up to 168 compatible channels per frequency band
- AES 256-bit encryption
- Ethernet networkable receivers
- Automatic channel scan quickly and easily fi nds a new frequency
- Network Scan fi nds clean frequencies for networked receivers
- IR Sync
- AMX/Crestron® control system ready
- ShurePlusâ„¢ Channels mobile app compatible
- Wireless Workbench® control software compatible
- Displays remaining battery life in hours and minutes when Shure SB900A is used
- Compatible with ULXD6 Boundary Transmitter and ULXD8 Gooseneck Transmitter
Specifications:
- System:
- Frequency Band: J50A (572 – 616 Mhz)
- Image Rejection: >70 dB, typical
- Latency: <2.9 ms
- RF Sensitivity: -97 dBm at 10-5 BER
- Working Range: 100 m line-of-sight
- Audio Frequency Range: 20 Hz to 20 kHz Note: Dependent on microphone type.
- Audio Dynamic Range (System Gain @ +10): >120 dB, A-weighted, typical
- Total Harmonic Distortion: <0.1% (−12 dBFS input, System Gain @ +10)
- Operating Temperature Range: -18°C to 50°C
- Receiver:
- Dimensions: 41 mm x 197 mm x 151 mm
- Weight: 777 g, without antennas
- Housing: Steel
- Power Requirements: 12 V DC @ 0.4 A, supplied by external power supply (tip positive)
- Spurious Rejection: > 80 dB, typical
- Antenna Connector Type: BNC
- Antenna Impedance: 50 Ω
- Gain Adjustment Range: -18 to +42 dB (in 1 dB steps)
- Configuration: ¼” (6.35 mm): Impedance balanced (Tip = audio, Ring = no audio, Sleeve = ground ) XLR: balanced (1= ground, 2 = audio +, 3 = audio −)
- Antenna Impedance: ¼” (6.35 mm): 100 Ω (50 Ω Unbalanced) XLR: 100 Ω
- Full Scale Outpu:t ¼” (6.35 mm): +12 dBV XLR: LINE setting = +18 dBV, MIC setting = -12 dBV
- Mic/Line Switch: 30 dB pad
- Network Interface: Single Port Ethernet 10/100 Mbps
- Network Addressing Capability: DHCP or Manual IP address
- Transmitter:
- Dimensions: 86 mm x 65 mm x 23 mm without antenna
- Weight: 138 g, without batteries QLXD2: 347 g, without batteries Note: Final weight depends on cartridge.
- Housing: Cast aluminum
- Battery Type: Shure SB900A Rechargeable Li-Ion or AA batteries 1.5 V
- Battery Runtime: (@ 10 mW) Shure SB900A rechargeable: up to 10 hours alkaline: up to 9 hours
- RF Output Power: 1 mW or 10 mW
- Occupied Bandwidth: < 200 kHz
- Modulation Type: Shure proprietary digital
- Mic Offset Range: 0 to 21 dB (in 3 dB steps)
