Tannoy CMS-801 PI SUB 8-Inch Ceiling Subwoofer
Tannoy CMS-801 PI SUB 8-Inch Ceiling Subwoofer
The CMS 801 SUB PI is a compact 400- Watt subwoofer that complements the entire range of CMS ceiling monitor systems. Thanks to a powerful 8″ long excursion LF driver, the UL certified CMS 801 SUB PI delivers dynamic low frequency extension and premium grade audio for music and speech reinforcement applications.
Optimized for Installation
Specifically designed with a self-aligning 5 way clamp system for fast, simple and cost effective installation, CMS 801 SUB PI features removable locking screw terminal connector with loop-thru functionality. A low-insertion loss 60 W transformer with convenient front panel tap switching, paintable powder coated steel mesh grille with dust protection, two tile support rails and one C-ring are all included. A back can and plaster (mud) ring are available separately.
LAB GRUPPEN Ready
The CMS 801 SUB PI is finished in semi matt white and optimized for use with LAB GRUPPEN amplifiers.
System
- Power handling
- Frequency response (-3 dB)
- 58 Hz – 160 Hz
- Frequency range (-10 dB)
- 42 Hz – 300 Hz
- System sensitivity (1 W @ 1 m)
- 92 dB (1 W = 2.45 V for 8 Ohms)
- Rated maximum SPL
- 112 dB (average) 118 dB (peak)
- With THP60
- 110 dB (average)
- Average
- 100 W
- Programme
- 200 W
- Peak
- 400 W
- Recommended amplifier power
- 200 W @ 8 Ohms
- Nominal impedance
- 8 Ohms
- Transformer taps (via front rotary switch)
- 70 V
- 60 W/30 W/15 W/7.5 W/OFF & Low impedance operation
- 100 V
- 80 W/30 W/15 W/OFF & Low impedance operation
- Crossover
- Integral 2nd order passive, 160 Hz
- Transducers
- Enclosure
- Low frequency / High frequency
- 1x 200 mm (8.00″) long throw woofer with multi fibre paper pulp cone
- Back can
- Zinc plated steel
- Baffle
- Reflex loaded UL 94V-0 rated ABS
- Grille
- Steel, with weather resistant coating
- Safety Features
- Safety ring located at rear of enclosure for load bearing safety bondClamping
- Design
- Security toggle clamp
- Backcan Options
- Pre Install (PI)
- Separate back can for pre installation
- Cable Entry Options
- Cable clamp & squeeze connector for conduit up to 22mm
- Conduit Knockouts
- 3 Sets of horizontal positions 19 / 22 / 28 mm (0.75 / 0.87 / 1.1″)
- Connectors
- Removable locking connector with screw terminals with “loop through” facility
- Safety agency ratings (pending)
- UL-1480, UL-2043, CE
- PI hole cutout diameter
- 295 mm (11.61″)
- Dimensions
- Bezel diameter
- 325 mm (12.80″)
- Back of ceiling surface to rear of back can (PI)
- 151.2 mm (5.95″)
- Back of ceiling surface to top of safety loop (PI)
- 168.5 mm (6.63″)
- Front of ceiling to rear of bass ports (no back can) PI
- 123.7 mm (4.87″)
- CMS 801 PI
- 4.7 kg (10.34 lbs)
- PI back can
- 4.2 kg (9.25 lbs)
- Included Accessories
- C Ring, tile bridge, paint mask, cutout template, grille
- Optional Accessories
- Plaster (Mud) Ring
