TTI PSA1301T Portable RF Spectrum Analyzer
TTI PSA1301T Portable RF Spectrum Analyzer
The PSA-T series incorporates the handheld computer within its housing to create a single integrated instrument. The unit is very compact and lightweight. It fits easily into the hand and takes up very little room within a toolkit. Access to the USB port of the handheld computer is provided within the body of the instrument, and all of the functionality of the Palm T|X is retained.
Features:
- 150kHz to 1300MHz frequency range
- Resolution bandwidths of 280kHz or 15kHz
- -96dBm typical noise floor at -20dBm reference level
- Measurement in dBm or dBμV
- Fully adjustable centre frequency and span in 1kHz steps
- Choice of centre plus span or start plus stop setting
- Zero span mode with AM and FM audio demodulation
- Sweep modes of normal, single, peak hold and average
- Reference waveforms displayed in contrasting colour
- Twin markers with readout of absolute & difference values
- Smart marker movement with selectable peak tracking
- Amplitude limit lines with editor and store/recall
- Unlimited storage for waveforms, set-ups and screens
- Data transfer to PC for analysis, documentation & printing
- More than 4 hours continuous operation from a charge
- Smaller and lighter than any other spectrum analyzer (weight less than 0.5kg)
- Handheld computer based facilities including word processing, spreadsheets, appointments, picture and video viewing, MP3, plus Web and Email via Bluetooth and WiFi
- Vast range of third party programs available including many for engineering, science and mathematics
Specifications
- FREQUENCY MEASUREMENT
- Frequency Span
- Frequency Range: 150 kHz to 1300 MHz
- Setting Modes: Centre frequency plus Span, or Start plus Stop frequencies
- Maximum Span: 1299.85 MHz
- Minimum Span: 320 kHz, or Zero Span with demodulation
- Set. Resolution: 1 kHz at any frequency
- Setting Accuracy: Reference Frequency Accuracy for Start, Stop & Centre (Zero-Span) frequencies
- Reference Frequency Accuracy
- Initial Accuracy: Better than ± 10 ppm at 20 °C
- Stability: Better than ± 10 ppm over 10 °C to 30 °C
- Ageing: Better than ± 3 ppm per year
- Phase Noise
- Phase Noise: Phase noise at 100kHz offset at 500MHz
- Typically -100dBc/Hz
- Resolution Bandwidth
- RBW: Selectable 280 kHz or 15 kHz
- Video Filtering: Selectable independently of RBW setting
- Markers
- No. of Markers: One, Two (or None)
- Resolution: 0.1 kHz at all frequencies
- Marker Accuracy: 1/320th of Span ± 0.1kHz plus reference frequency accuracy.
- Readout: The frequencies at the marker points and the frequency difference are displayed
- DISPLAY
- Display Type: 3.7 inch (9.4 cm) backlit TFT LCD, 480 x 320 pixels total, 16 bit colour, touch screen.
- Trace Area: 300 x 320 pixels (high resolution mode).
- Graticule: 8 x 10 divisions, light grey graticule.
- Displayed Points: 320 points per sweep (peak detected).
- Live Trace: Dot-joined trace from current or held sweep.
- Reference Trace: Stored trace either recalled from memory or copied directly from live trace.
- Limit Lines: Up to two limit lines can be displayed.
- Resolution Modes: Selectable as High or Low Resolution
- CONNECTORS
- RF Input: Standard SMA connector.
- DC Power: 1.3 mm power socket for 5.2V/1A external power source.
- USB: Mini USB connector which provides direct access to the USB port of the handheld.
- Audio Out: 3.5 mm jack socket for demodulated audio out (accepts mono or stereo plugs).
- MECHANICAL
- Size: 170mm high x 97mm wide x 47mm deep
- Weight: 495 grms total inc. Palm T|X.
- Tilt Stand:Built-in tilt stand for bench use which angles the unit at approx. 25 degrees to the horizontal.
- Mounting Hook: The stand incorporates a hook to facilitate hands-free operation where no flat surface is available.
- Stylus: Casing incorporates standard Palm stylus.
