Yorkville SA153 3-Way Full-Range Powered Speaker
Yorkville SA153 3-Way Full-Range Powered Speaker
The 3-way 15″Â Yorkville Sound SA153Â is a professional powered portable PA speaker from the Synergy Array Series system and is designed to be used as the main full-range top and used in conjunction with the SA315S and SA221S powered subwoofers to create a scalable point-source sound system well suited for professional sound reinforcement companies, rental houses, touring bands, musicians, festivals, concerts, mobile DJs, and other sound providers.
The heart of the SA153 full range speaker incorporates Tom Danley’s Paraline Lens and Synergy Horn technologies, which provides remarkably high output and pristine clarity. The SA153’s Paraline lens is loaded with a coaxial compression driver along with a 15″ woofer mounted on a 22.5°H x 45°V constant directivity horn. By channeling the sound waves along equidistant paths, the Paraline lens converts the point source compression driver into a line source with constant phase and amplitude. The result is a completely balanced sound field and coverage pattern across the cabinet’s horizontal and vertical planes. The unusual design of the SA153 allows the cabinets to be placed side by side without interference. Cabinets can be placed together to cover as wide a pattern as desired, including 360 degrees, without any lobing or interference patterns.
The technologically advanced system provides flexibility and power without being overly complex. The rear panel features a simplified set of controls for integrating the speaker into any environment. There are indicator LEDs for clip, limit, and activity. The Level control knob attenuates or boosts the speaker’s output, while a dedicated HF Adjust selector helps keep the frequency response flat when using an array of multiple cabinets. A Mode Switch (Sub/No Sub) allows the speaker to be used without a sub (No Sub) with a high-pass of 40 Hz, while the Sub selection utilizes a 100 Hz HP filter.
The SA153 has a single XLR input with two parallel XLR outputs for connecting additional SA135 full range and SA315S or SA221S subwoofers. Up to 20 subwoofers/tops can be daisy-chained without signal loss (with balanced cables). The rugged enclosure is made from 15mm Birch plywood with a tough speaker paint coating. The speaker features a rail and lockbar rigging system, which makes flying the system a safe and simple affair. The lockbar also attaches to the cabinet dolly for safe and easy transport. Interlocking UHMWÂ feet and cups are also on the top and bottom to ensure stability when stacking. A power cable is included.
Paraline Lens Technology
The unique geometry of the patented Paraline Lens is capable of producing a precisely shaped wavefront that matches the horn’s physical coverage pattern. It does this while providing a continuous horn throat from cabinet to cabinet on the horizontal plane. This virtually eliminates the comb filtering usually associated with traditionally arrayed cabinets. The Paraline Lens is fed by a high-output, mid-high driver which results in seamless coupling and a matching coverage pattern.
Synergy Horn Technology
The Synergy Horn configuration of the Paraline Lens coupled with a single 15″ high-output woofer seamlessly couples the output from both drivers while performing as a true point source. The horn utilizes the entire front area of the cabinet maximizing efficiency and directivity control.
Features at a Glance
- 3-way, full-range powered speaker: 2600 watts (program), 5000 watts (peak)
- 1 x 15-inch LF woofer, 1 x MF/HF Co-ax Compression Driver
- Incorporates Tom Danley’s patented Paraline Lens and Synergy Horn technologies
- Exceptionally high output and pristine clarity
- Simple and secure rigging hardware
- Extremely well controlled coverage pattern
- Measured Max SPL (C-Weighted, Max Hold): 131 dB continuous, 137 dB Peak
- Frequency Response (±3 dB): 55 Hz to 18 kHz
- Dispersion (H x V): 22.5 x 45° (asymmetrical 10° up, 35° down)
- Audio inputs: 1 XLR, 2 x XLR loops
- AC connections: 1 In, 1 Loop (locking powerCON)
- Fully scalable for any size event
- Designed for use with Synergy SA315 and SA221S subwoofers
- Constructed of high-strength, multiply birch plywood
Specification
- PA Speaker
- Configuration
- Active 3-Way
- Enclosure Type
- Horn / Folded Horn Loudspeaker
- Total Power Capacity
- 2600 W Program
- 5000 W Peak
- Amplifier Power Rating
- HF:1 x 300 W Program
- MF:1 x 300 W Program
- LF:1 x 2000 W Program
- Amplifier Class
- HF: Class-H
- MF: Class-H
- LF: Class-D
- HF Driver
- 1 x 1.75″ / 44.45 mm
- MF Driver
- 1 x 3.5″ / 88.9 mm
- LF Driver
- 1 x 15″ / 38.1 cm Woofer
- LF Voice Coil
- 3.5″ / 88.9Â mm
- Magnet
- Neodymium
- Performance
- Frequency Response
- 55 Hz to 18 kHz ±3 dB
- Maximum SPL
- 137 dB (Peak)
- 131 dB (Continuous)
- Coverage Angle
- 22° H x 45° V (Main)
- Gain Range
- -24 dB to +8 dB
- I/O Impedance
- Input:35 Kilohms (Balanced)
- Protections
- Crossover Overload, Excursion, Output Limiter, Overvoltage, Power Supply, Thermal
- Connectivity
- Audio I/O
- 1 x XLR 3-Pin Female Balanced Line Input
- 2 x XLR 3-Pin Male Balanced Line Output
- Signal Processing
- Dynamic Processing
- Fast Limiter, Limiter, Peak Limiter
- Power
- AC Input Power
- 100 to 240 VAC, 50 / 60 HzÂ
- AC Power Connector
- 1 x powerCON Input (Locking)
- 1 x powerCON Output (Locking)
- Current Consumption
- 120 VAC:
- 3.3 A (Max)
- 1.8 A (Typical)
- 240 VAC:
- 1.6 A (Max)
- 0.92 A (Typical)
- Physical
- Handles
- 1 x Each Side
- Cooling
- Convection
- Construction Material
- Plywood
- Dimensions
- 21 to 12.3 x 24 x 26.5″ / 53.3 to 31.2 x 61 x 67.3Â cm
- Weight
- 115Â lb / 52.2Â kg
Drivers
